Home About Us Services Guide Emergency Service Our Services Documented Report Tools Hub Glossary Blog Service Cities FAQ Pest Control Contact Us
Book onlineTracking number at once · no holdCall nowWater leak emergencyWhatsAppMessage us

General contracting & turnkey for duplexes in Tyba, Dammam

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

In short: General contracting & turnkey for duplexes in Tyba starts with the site survey and measurements, then the written bill of quantities, before anything is opened. Tyba is about 11.6 km from the sea coast (OpenStreetMap). Pricing starts from General contracting, turnkey (per m²) (SAR 900–2,500 per m²), and other items are quoted after the visit.

General contracting & turnkey in Tyba: the local context

The centre of Tyba is at 26.3583, 50.0501, about 7.9 km from the centre of Dammam, with an approximate radius of 2.9 km. The approximate area shown on the map is centred here. Main roads in or near Tyba: King Abdullah Road, Dammam–Riyadh Expressway, Abu Hadriyah Road.

Most buildings in Tyba were handed over in recent years. Tyba is mainly villas.

Tyba is about 11.6 km from the sea coast (OpenStreetMap). The centre of Tyba sits about 20 m above sea level (SRTM open elevation data).

Tyba sits at 26.3583, 50.0501, roughly 7.9 km from the centre of Dammam, within an approximate radius of 2.9 km. Its centre is about 20 m above sea level and about 11.6 km from the sea coast. Most buildings in Tyba were handed over in recent years, and the area is mainly villas. For a general contractor, this combination shapes the work. Because the housing stock is fairly new, the main jobs are usually finishing, fit-out and upgrades rather than structural repair, so our site surveys focus on how the existing shell has been completed and what the owner wants changed. The villa character also means owners often expect a full handover on a single contract, which is why we price turnkey work per square metre from the start.

Each of these facts has a practical effect on how we deliver a duplex. The location about 7.9 km from central Dammam and close to the main roads King Abdullah Road, Dammam–Riyadh Expressway and Abu Hadriyah Road means materials and crews can be moved in and out efficiently, which helps keep the programme predictable. The modest elevation and distance from the coast tell us that we should plan for the typical dust and heat of the eastern province, so we specify finishes and paints suited to those conditions. Since the buildings are recent, we check existing services, including split AC supply and installation at SAR 350–900 per unit, before any ceiling or tiling begins, so that later trades do not have to cut into finished work. A visit and quantity survey, charged at SAR 150–400 per visit, is the starting point for every duplex job in Tyba.

Owners who hire for a duplex here often avoid a few common mistakes, and we design our process to prevent them. The first is leaving the finishing scope vague: we set out full finishing to handover at SAR 300–800 per m² or turnkey general contracting at SAR 900–2,500 per m² with clear inclusions, so the price reflects the actual work. The second is skipping surface preparation before painting, which we budget separately at SAR 10–25 per m² for interior and exterior work. The third is choosing finishes without checking the fixings and adhesives needed, such as tiling at SAR 25–60 per m² with adhesive and grout included. Gypsum false ceilings at SAR 40–90 per m² and plastering with guides at SAR 15–35 per m² are priced separately so that owners can see where every riyal goes.

Service-area map for contracting & finishing in Tyba, DammamTybaCentre: Dammam2 kmNSchematic · coordinates © OpenStreetMap contributors (ODbL)
The approximate extent of Tyba (radius about 2.9 km) — the exact location of your job is set when you book.

In a duplex, the two floors often share lines, so tests are done floor by floor.

Signs that call for general contracting & turnkey

The following signs are worth checking before they grow:

Where the problem usually comes from

How we choose the tool in Tyba

Tool or methodWhat it measuresWhy it is chosen here
Written workmanship termsWhat is covered after handoverLimits: as written in the contract
Stage-by-stage checksProblems before the next stage covers themLimits: each stage is signed off
Site survey and measurementsThe real quantities and conditions on siteLimits: the basis of the quote, not a substitute for it
Written bill of quantitiesEvery item with its unit and quantityLimits: final prices depend on the site visit

From the first visit to the report

  1. Survey and scope: The full scope is written.
  2. Bill of quantities and schedule: Items, stages and dates are agreed.
  3. Execution by stages: Each stage is checked before the next.
  4. Handover: Final check, snag list and handover.

Facts and costs — Tyba

ItemValueSource
District profileMost buildings in Tyba were handed over in recent yearsKashf data (owner)
RoadsMain roads in or near Tyba: King Abdullah Road, Dammam–Riyadh Expressway, Abu Hadriyah RoadKashf data (owner)
District profileTyba is about 11.6 km from the sea coast (OpenStreetMap)© OpenStreetMap contributors (ODbL)
Centre of Tyba26.35827, 50.05014© OSM
Distance from the centre of Dammamabout 7.9 kmCalculated from the coordinates
District profileTyba is mainly villasKashf data (owner)
District profileThe centre of Tyba sits about 20 m above sea level (SRTM open elevation data)SRTM (NASA) open data
General contracting, turnkey (per m²)SAR 900–2,500 per m²Owner price list (Dammam)
Site visit and quantity surveySAR 150–400 per visitOwner price list (Dammam)

Common questions about general contracting & turnkey in Tyba

Where is Tyba within our coverage in Dammam?

The centre of Tyba is at 26.3583, 50.0501, about 7.9 km from the centre of Dammam. The exact address of your property is set when you book.

Where does general contracting & turnkey for duplexes start in Tyba?

We start with survey and scope (the full scope is written), then bill of quantities and schedule (items, stages and dates are agreed).

What does general contracting & turnkey cost in Tyba?

From our published price list: General contracting, turnkey (per m²) SAR 900–2,500 per m²; Site visit and quantity survey SAR 150–400 per visit. Quantities are confirmed at the inspection.

What do I receive after the work?

A written scope, a schedule, stage sign-offs and the handover file, in a technical report that carries a verification code.

Mistakes that cost more

The written outputs

You receive: a written scope, a schedule, stage sign-offs and the handover file, in a technical report with a verification code.

If you live in Dammam and are new to the area

  • Have access ready to the water meter, the tank hatches, the roof and the main valve; in apartment buildings the roof keys are often with the building guard (haris).
  • Prices are in Saudi riyals (SAR); the final price is confirmed after the inspection, before any work starts.
  • Keep photos of the problem and of any earlier repairs — they help the technician compare before and after.
  • If you rent, tell your landlord or building management before the visit and agree in writing who pays; the written report can be shared with them.

Sources and method