Pool leak detection for residential buildings in Khobar

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

Before we start: what we know about Khobar

The centre of Khobar sits about 9 m above sea level (SRTM open elevation data). Khobar is about 1.8 km from the sea coast (OpenStreetMap).

Team note on Khobar: Kashf teams serve this city and its nearby districts with the same documented inspection standard: device-based leak detection without demolition, a written report, and a clear scope before any work begins..

Wondering whether your pool is losing water through a crack or a faulty fitting rather than simply evaporating in the heat? In Khobar, the answer depends partly on where your building stands. The centre of Khobar sits about 9 m above sea level, and the city is about 1.8 km from the sea coast. Those facts matter when a pool loses water, because the local ground and groundwater conditions shape how leaks show up and how they should be traced. A proper leak check separates normal evaporation from real loss, so you know whether a repair is actually needed.

Our inspection for residential buildings begins with a review of the pool's water level over a set period, followed by a check of the pump, filter, and return lines for signs of pressure loss. The technician then looks at the pool shell, the skimmer, the light niches, and the tile line for cracks or wet patches. Where the cause is still unclear, dye and pressure testing are used to pinpoint the exact spot. Each step is recorded so the building manager can see what was tested, what was found, and what the next action should be. If the pool tank needs a new internal finish after repairs, the coating is priced per square metre, typically SAR 25–60 per m², and the final figure depends on the surface area and the work involved.

Before the visit, gather the details that help the technician work faster. Note when you first noticed the water dropping, whether the loss is steady or sudden, and whether the pump has been running longer than usual. Share any past repair records, the age of the pool, and the access routes to the plant room and the pool deck. Keep the pump and filter accessible, and switch off the heater and pump only when the technician asks you to, so the test readings stay accurate. Clear the pool area of loose furniture and make sure the water level is at the normal mark on the day of the test. With these steps in place, the inspection can move straight to the testing that counts.

For a whole building, a survey of the shared systems comes before unit-by-unit work.

When do you need pool leak detection?

The following signs are worth checking before they grow:

• The level drops more than evaporation explains
• Damp ground around the pool
• The pump draws air

The most common causes

• A common cause: buried suction and return lines.
• The skimmer and return fittings — we check this before anything else.
• A common cause: cracks in the shell or tiles.

Tools we use in Khobar

The steps in order

1. Documented bucket test: Pool loss is compared with evaporation side by side.
2. Equipment on and off: The test is repeated with the pump running and stopped.
3. Pressure test per line: Each buried line is tested separately.
4. Dye and listening: Fittings and cracks are confirmed with dye and acoustic checks.

Facts and costs — Khobar

Short answers for Khobar

What we advise against

• Re-tiling the pool before the lines are tested

What you receive

The written output: a result for each line and the likely leak position. The report is numbered and can be checked with its verification code.