High water bill for apartments in Al Mhmdya, Riyadh

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Al Mhmdya for high water bill

The centre of Al Mhmdya is at 24.7326, 46.6503, about 3.3 km from the centre of Riyadh, with an approximate radius of 2 km. The service-area circle on the map below is drawn from this point. The nearest wadi channel is about 1.9 km from the centre of Al Mhmdya (OpenStreetMap).

The centre of Al Mhmdya sits about 625 m above sea level (SRTM open elevation data). Main roads in or near Al Mhmdya: King Fahd Road, King Abdullah Road, Al Takhassusi Road.

Imagine an owner of a mid-sized apartment building who opens the monthly water statement and finds the figure has climbed well beyond what the household has been using. The building is occupied, nothing obvious has changed, and the owner is left wondering whether the meter is faulty, whether tenants are wasting water, or whether something in the building itself is responsible. For a property like this, a sudden rise in the bill is often the first sign that the storage and distribution side of the building needs a closer look rather than a simple complaint to the utility.

Al Mhmdya sits at roughly 625 metres above sea level, about 3.3 km from the centre of Riyadh, and its nearest wadi channel lies about 1.9 km from the centre of the district. These local facts matter for water use in a practical way. Buildings here commonly rely on rooftop or ground-level storage tanks, and the altitude and dry climate mean that tanks and their pumping arrangements work hard to keep pressure steady. A tank that is ageing or poorly protected can lose water through leaks or pump cycling, which shows up as higher consumption even when taps are closed. Owners should therefore treat the storage system as a likely contributor before assuming tenant behaviour is the cause.

Start by reading the last several bills together and noting when the increase began, then check every tap, toilet cistern and outdoor connection for slow drips. Next, inspect the storage tank and its lid, and ask a qualified technician to assess the internal coating; coating work is typically priced at SAR 25–65 per m², so getting a measured estimate for the actual tank area is a sensible step. Ask the technician to check for leaks and float-valve faults, and to confirm the pump is not cycling unnecessarily. Finally, keep a written record of each repair and meter reading so that any further change in consumption can be tracked clearly.

In an apartment, a problem may start in your unit or in a shared line; we separate the two before any work.

Signs worth paying attention to

The following signs are worth checking before they grow:

• The meter moves at night
• A sudden jump in the bill without a clear reason
• The tank fills more often than before

Causes we see in the field

• A silent leak in the network.
• A float valve that does not close.
• A leaking toilet cistern — we check this before anything else.

Tools we use in Al Mhmdya

How the work is done, step by step

1. Two meter readings: Readings are taken with all use stopped, some time apart.
2. Cisterns and float valve: The usual silent causes are checked first.
3. Instrument survey: If the loss continues, the network is surveyed with instruments.
4. Report: You receive the readings in writing.

Quick comparison: facts and costs in Al Mhmdya

Short answers for Al Mhmdya

What we advise against

• Waiting for the next bill instead of testing the meter

What you receive

You receive: a report with the readings to support your follow-up on the bill, in a technical report with a verification code.