Hidden water leak detection in Al Ymama, Riyadh: cost & published offers

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Al Ymama for hidden water leak detection

The centre of Al Ymama is at 24.5940, 46.7161, about 13.9 km from the centre of Riyadh, with an approximate radius of 1.2 km. The approximate area shown on the map is centred here. The centre of Al Ymama sits about 586 m above sea level (SRTM open elevation data).

The nearest wadi channel is about 1 km from the centre of Al Ymama (OpenStreetMap). Main roads in or near Al Ymama: South Ring Road, South Ring Road, King Fahd Sub Road.

Is a hidden water leak in your Al Ymama home or building costing you money without you knowing it? Al Ymama is a district in Riyadh, and its centre sits at 24.5940, 46.7161, about 13.9 km from the centre of Riyadh, with an approximate radius of 1.2 km. The centre of Al Ymama sits about 586 m above sea level, and the nearest wadi channel is about 1 km from the centre. Those are the local facts that shape how we look at your site, but the leak itself is found by testing the pipes, not by the map.

The inspection starts with a visual check of meters, valves and accessible pipework, followed by a pressure test to see whether the system holds pressure when no taps are open. If the pressure drops, the technician moves to listening and tracing equipment to narrow down where the water is escaping, especially under floors, behind walls and around tanks. Where a storage tank is involved, the team inspects its internal condition and can quote tank internal coating at SAR 25–70 per m², which is the published range for that work. Once the leak point is confirmed, the report explains what was found and which repair is needed before any work begins.

Before the visit, gather your water bills for the last few months so the technician can compare usage over time and spot a sudden rise. Note any damp patches, unusual sounds from pipes, or areas where the floor feels warm or the ground stays wet. Clear access to the meter, the main valve, and any roof or ground-level tanks, and make sure someone who knows the property can be present. Tell the team how old the building is and whether the pipes were replaced, since that changes where leaks usually occur. With this information ready, the visit is quicker and the findings are more reliable.

Prices shown on this page come from our own published price list for the city; the final price is set after inspection.

When do you need hidden water leak detection?

These are the signs most often linked to hidden water leak detection:

• A water bill higher than usual with no change in use
• The meter keeps turning with every tap closed
• A hissing or trickling sound in the wall after the taps are off
• A damp patch that slowly grows on a wall or ceiling

The most common causes

• A cracked pipe under floor tiles — we check this before anything else.
• A corroded joint inside a wall — we check this before anything else.
• A hot line that expands and contracts with use.

How we choose the tool in Al Ymama

From the first visit to the report

1. Meter test: We stop all use and watch the meter to confirm whether water is actually being lost.
2. Line isolation: We close valves one line at a time to see which line loses pressure.
3. Acoustic listening: We follow the sound of water escaping under pressure and compare its strength between points.
4. Thermal imaging and moisture mapping: We map how far the wet area spreads behind paint and tiles.
5. Documentation: Readings, photos and the likely position go into a written report.

Facts and costs — Al Ymama

Common questions about hidden water leak detection in Al Ymama

What we advise against

• Breaking tiles at random before the line is identified
• Repainting the stain while the moisture keeps coming back

What you receive

You receive: a technical report with the readings, the likely leak position and a confidence level, in a technical report with a verification code.