Underground tank leak detection for rest houses & farms in Am Al Hmam Al Shrqy, Riyadh

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Am Al Hmam Al Shrqy for underground tank leak detection

The centre of Am Al Hmam Al Shrqy is at 24.6828, 46.6593, about 3.8 km from the centre of Riyadh, with an approximate radius of 1.2 km. The service-area circle on the map below is drawn from this point. The centre of Am Al Hmam Al Shrqy sits about 618 m above sea level (SRTM open elevation data).

Main roads in or near Am Al Hmam Al Shrqy: Makkah Road, Prince Turki bin Abdulaziz Al Awwal Sub Road, Prince Turki bin Abdulaziz Al Awwal Road.

Is there a way to know if the underground fuel or water tank at my rest house or farm in Am Al Hmam Al Shrqy is leaking before the ground starts to smell or the water bill jumps? Yes, and the first step is a proper inspection rather than guesswork. Am Al Hmam Al Shrqy is centred at 24.6828, 46.6593, about 3.8 km from the centre of Riyadh, with an approximate radius of 1.2 km, so most properties here are a short drive from the city yet set on open ground. The centre of the area sits about 618 m above sea level, which matters because the terrain and soil around a tank can shift how moisture collects near buried walls.

The inspection is carried out in clear stages. The technician first reviews the tank's age, its material and the pipes connected to it, then checks the fill points, vents and dispensers for signs of seepage. Next comes the testing of the tank itself and the surrounding ground, looking for changes in levels and for moisture that should not be there. Where the tank's internal surface is worn, the cost of restoring it is quoted per square metre, typically SAR 25–70 per m² for internal coating, so the size of the tank directly shapes the estimate. Each step is recorded so you receive a written summary of what was found, what is working and what needs attention.

Before the visit, prepare a few things to make the inspection faster and more accurate. Gather any earlier records about the tank's installation, repairs or coating, and note the dates of any unusual fuel or water loss. Clear access to the fill points, vents and the area above the tank so the technician can work safely, and keep vehicles and livestock away from the spot. If you have noticed odours, damp patches or a drop in the water level, write them down with approximate locations. This preparation helps the inspection focus on the right places from the start.

Rest houses and farms often have long buried lines, tanks and irrigation that need separate tests.

When do you need underground tank leak detection?

These are the signs most often linked to underground tank leak detection:

• A noticeable drop in the water level overnight
• The pump runs for longer periods
• The tank needs refilling faster than usual
• Damp or salt marks on the tiles above the tank

The most common causes

• A common cause: a float valve that does not close, so water is wasted.
• A common cause: construction joints and corners.
• Cracks in the concrete tank walls or floor — we check this before anything else.

How we choose the tool in Am Al Hmam Al Shrqy

From the first visit to the report

1. Safety first: Tank lids and confined spaces are handled with ventilation and a second person on site.
2. Documented level test: Filling and use are stopped and the level is recorded against time.
3. Isolating the tank from the network: This tells us whether the loss is from the tank body or from the supply line.
4. Checking the body and connections: Inlet, outlet and overflow connections are inspected.
5. Recommendation: You get the next step in writing: repair, waterproofing or a line test.

Facts and costs — Am Al Hmam Al Shrqy

Short answers for Am Al Hmam Al Shrqy

Mistakes that cost more

• Waterproofing the tank before confirming the loss is from the tank and not the line
• Ignoring the float valve

The written outputs

You receive: the written level-test result and the recommended next step, in a technical report with a verification code.