Building restoration in Alysha, Riyadh: for companies (annual contract)

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

What is specific about Alysha for building restoration

The centre of Alysha is at 24.6308, 46.6842, about 9.2 km from the centre of Riyadh, with an approximate radius of 1.2 km. The service-area circle on the map below is drawn from this point. Main roads in or near Alysha: Imam Abdulaziz bin Muhammad bin Saud Road, Samahat Al-Sheikh Abdulaziz bin Baz Road, Asir Road.

The centre of Alysha sits about 604 m above sea level (SRTM open elevation data). The nearest wadi channel is about 1.2 km from the centre of Alysha (OpenStreetMap).

Alysha, Riyadh is a district that sits about 9.2 km from the centre of Riyadh, with its centre at 24.6308, 46.6842. Before any work is quoted for a building here, the first thing we check is the location itself. The centre of Alysha is roughly 604 m above sea level, and the nearest wadi channel runs about 1.2 km from the centre of the district. Both facts matter for restoration work. Elevation and proximity to a drainage channel shape how rainwater moves across a site and how it reaches the foundations and lower walls of older buildings, so we look at drainage paths, ground levels and the condition of rendering and damp-proofing before we look at anything cosmetic.

What is left to the site visit is the detail that no map can show. A technician needs to see the actual condition of the façade, the roof edges, the parapets, the window surrounds and any signs of water staining, salt efflorescence or cracking. Access routes, the height of the work, the state of existing finishes and whether the building is occupied during working hours all change the scope. We also confirm which surfaces are original and which were repaired earlier, because mixing materials can cause new damage. Pricing for restoration is set per square metre, and the final area is measured on site, so the visit is where the scope is fixed. A maintenance visit, which is priced per visit, is a separate arrangement and is confirmed at the same time.

To help the technician prepare, company managers should gather a few details before the visit. Note the building's approximate age, any previous restoration work and its dates, and any known leaks or damp areas. Provide a rough floor plan or elevation drawing if one exists, and state which parts of the building must stay in use. Mention any access restrictions, permit requirements or preferred working hours. If you have photographs of the problem areas taken from several angles, send them in advance. The more clearly the existing condition is described, the more accurately the site visit can scope the work and the sooner a firm estimate can follow.

For companies, an annual contract sets the scope, the visit schedule and the reports in writing.

Signs worth paying attention to

If you notice one of these signs in Alysha, it is a good moment to talk to the team:

• Damage left after a leak
• Cracks in the plaster
• Peeling paint

Where the problem usually comes from

• A leak that was never treated — we check this before anything else.
• The age of the building.
• A common cause: earlier damp.

Tools and methods, and when we use them

The steps in order

1. Survey: The cause of the damage is recorded.
2. Treating the cause: The water source is stopped first.
3. Restoration: Plaster, tiles and paint.
4. Handover: Before-and-after photos.

Quick comparison: facts and costs in Alysha

Questions from Alysha

Mistakes that cost more

• Restoring before the damp source is stopped

The written outputs

You receive: before-and-after photos and the work done, in a technical report with a verification code.