Underground tank leak detection for apartments in Atyqh, Riyadh

Prepared by the technical team · editorial review · last updated 13 November 2026 · Sources

Why underground tank leak detection differs in Atyqh

The centre of Atyqh is at 24.6016, 46.7075, about 12.9 km from the centre of Riyadh, with an approximate radius of 1.2 km. The approximate area shown on the map is centred here. Main roads in or near Atyqh: King Fahd Road, King Fahd Sub Road, Al Suwaidi General Road.

The centre of Atyqh sits about 588 m above sea level (SRTM open elevation data). The nearest wadi channel is about 0.5 km from the centre of Atyqh (OpenStreetMap).

Wondering whether the underground water tank beneath your apartment building in Atyqh, Riyadh, could be leaking? It is a fair question for any property owner, and the local setting is worth knowing before you call anyone. Atyqh is centred at 24.6016, 46.7075, about 12.9 km from the centre of Riyadh, and it covers an approximate radius of 1.2 km. The area sits about 588 m above sea level, and the nearest wadi channel runs roughly 0.5 km from the centre of the district. Ground conditions and drainage near a wadi can affect how water moves around buried structures, so a leak check here should look at the surrounding ground as well as the tank itself.

A typical inspection for an apartment tank starts with a review of your water levels and any recent changes in usage or pressure, since a steady drop without explanation is often the first sign of trouble. The inspector then examines the tank's exterior access points and the pipework connected to it, looking for signs of seepage, damp patches in nearby walls or floors, and unusual ground moisture. Where the inside of the tank is accessible, the inspector checks the internal lining for cracks, flaking or bare areas. If the lining needs repair, internal coating is usually priced per square metre, in a range of SAR 25–70 per m², and the final figure depends on the tank's size and the condition of its surfaces.

Before the visit, gather a few details that will speed up the work. Note the date you first noticed any drop in water supply, any damp or staining in the building, and when the tank was last cleaned or repaired. Make sure the inspector can reach the tank cover and the plant room, and let the building's caretaker or management know about the visit in advance. Having your tank's approximate dimensions and any earlier service records ready will also help the inspector give you a clearer picture of what the repair is likely to involve.

In apartment buildings, the floor below is often where a leak shows first.

When do you need underground tank leak detection?

These are the signs most often linked to underground tank leak detection:

• A noticeable drop in the water level overnight
• The pump runs for longer periods
• The tank needs refilling faster than usual

Causes we see in the field

• A float valve that does not close, so water is wasted.
• Construction joints and corners.
• A common cause: cracks in the concrete tank walls or floor.

Tools and methods, and when we use them

How the work is done, step by step

1. Safety first: Tank lids and confined spaces are handled with ventilation and a second person on site.
2. Documented level test: Filling and use are stopped and the level is recorded against time.
3. Isolating the tank from the network: This tells us whether the loss is from the tank body or from the supply line.
4. Checking the body and connections: Inlet, outlet and overflow connections are inspected.
5. Recommendation: You get the next step in writing: repair, waterproofing or a line test.

Facts and costs — Atyqh

Questions from Atyqh

What we advise against

• Waterproofing the tank before confirming the loss is from the tank and not the line
• Ignoring the float valve

The written outputs

The written output: the written level-test result and the recommended next step. The report is numbered and can be checked with its verification code.